MacDon FlexDraper FD1 Series Operator's Manual page 102

• If the indicator range is as shown, the wing is
too heavy.
15. If no adjustment is required, place wrench (A) back onto
the float module right leg.
16. If no adjustment is required, reinstall linkage cover (A)
and secure it with bolt (B). If adjustment is required,
refer to Adjusting Wing Balance, page
214683
OPERATION
Figure 3.65: Wrench Indicator
Figure 3.66: Torque Wrench
79.
Figure 3.67: Linkage Cover
78
A
B
A
Revision A