Moving Rear (Right) Wheels Into Field Position - MacDon D65 Operator's Manual

5. Align lift hook (A) with lug (B) and lift wheel assembly
to engage pin in hook (A). Ensure latch (C) is engaged.
6. Install clevis pin (D) and secure with hairpin to center
of axle.
7. Lift wheel assembly to desired height and slide
linkage (A) into appropriate slot in vertical support.
8. Push down on handle (B) to lock.

Moving Rear (Right) Wheels into Field Position

To move the rear (right) transport wheels into field position, follow these steps.
1. Pull pin (A) on the left hand wheel behind the header.
Swivel wheel clockwise and lock with pin (A).
169899
OPERATION
Figure 4.78: Front (Left) Wheels
Figure 4.79: Front (Left) Wheels
Figure 4.80: Left Rear Wheel
94
Revision A