Converting From Field To Transport Position; Moving Front (Left) Wheels Into Transport Position - MacDon FlexDraper FD1 Series Operator's Manual

13. Complete the conversion by ensuring the left side (A)
and right side (B) wheels are in the position shown.

3.12.4 Converting from Field to Transport Position

Moving Front (Left) Wheels into Transport Position

DANGER
To avoid bodily injury or death from unexpected start-up or fall of raised machine, always stop engine,
remove key, and engage safety props before going under header for any reason.
CAUTION
Stand clear of wheels and release linkage carefully as wheels will drop once the mechanism is released.
1. Pull the handle (B) upwards to release and raise the
linkage (A) fully upwards into the vertical support.
2. Raise the header fully, stop the engine, and remove the
key from ignition. Engage the header safety props.
214683
OPERATION
Figure 3.527: Field Position
Figure 3.528: Suspension Linkage
298
A
A
B
Revision A
B