MacDon FlexDraper FD1 Series Operator's Manual page 328

8. Connect the outer half (B) of the tow-bar to the inner
half (A).
9. Lift the outer half (B) and insert it into the inner half (A).
10. Secure the two halves together with the L-pin (A) and
then turn to lock. Secure the L-pin with ring (B).
11. Connect the electrical harness to connector (C).
214683
OPERATION
Figure 3.540: Tow-Bar Assembly
A
Figure 3.541: Tow-Bar Assembly
A
Figure 3.542: Tow-Bar Assembly
304
B
A
B
C
B
Revision A