Draper Deflector (Wide); Stripper Bars - MacDon FlexDraper FD1 Series Operator's Manual

6.5.5 Draper Deflector (Wide)

Wide metal draper deflectors attach to the inboard side of
the endsheets to prevent material from falling through the
gap between the endsheet and the draper.
IMPORTANT:
The wide draper deflector is NOT compatible with the Upper
Cross Auger option.

6.5.6 Stripper Bars

Stripper bars improve feeding in certain crops such as rice.
They are NOT recommended in cereal crops.
Select the stripper bar kit based on combine feeder house
width. Refer to Table 6.1, page
NOTE:
MD #B6043 is for John Deere S6X0 Series only.
Table 6.1 Stripper Bar Configurations and Recommendations
Bundle
Stripper Bar Length
(MD #)
B6042 265 mm (10-1/2 in.)
265 mm (10-1/2 in.)
B6043
(with cutout)
B6044 325 mm (13 in.)
B6045 365 mm (14-1/2 in.)
B6046 403 mm (16 in.)
B6213 515 mm (20 in.)
214683
OPTIONS AND ATTACHMENTS
557.
Opening Width
(Installed on FM100)
1317 mm (52 in.)
1317 mm (52 in.)
1197 mm (47 in.)
1117 mm (44 in.)
1041 mm (41 in.)
817 mm (32 in.)
Figure 6.21: Draper Deflector (Wide)
Figure 6.22: Stripper Bar
For John Deere S6X0 Series only
557
Recommended Feeder
House Width
1250–1350 mm (49–65 in.)
For specialty crops only
1100 mm (43-1/2 in.) and below
For specialty crops only
For specialty crops only
Revision A