MacDon FlexDraper FD1 Series Operator's Manual page 392

5. Store the driveline (A) on the driveline support
bracket (B) by pulling back the collar (C) on the driveline
and fitting it over the support bracket weldment (D).
Release the collar so it locks into place over the
weldment.
6. Attach safety chain (E) to support bracket (B).
7. Push in the lock button (B), and pull the handle (C) to
release the multicoupler (A).
8. Push the handle (A) to the closed position until the lock
button (B) snaps out. Close the cover.
214683
HEADER ATTACHMENT/DETACHMENT
368
A
E
Figure 4.131: Driveline
A
B
C
Figure 4.132: Float Module Connections
B
Figure 4.133: Float Module Receptacles
D
B
C
1024064
A
Revision A