Break-In Period - MacDon FlexDraper FD1 Series Operator's Manual

3.3 Break-in Period

CAUTION
Before investigating an unusual sound or attempting to correct a problem, shut off engine and
remove key.
NOTE:
Until you become familiar with the sound and feel of your new header, be extra alert and attentive.
After attaching the header to the combine for the first time, follow these steps:
1. Operate the machine with the reels, drapers, and knives running slowly for five minutes. Watch and listen
FROM THE OPERATOR'S SEAT for binding or interfering parts.
NOTE:
Reels and side drapers will not operate until oil flow fills the lines.
2. Refer to 5.3.2 Break-In Inspection, page 388
214683
OPERATION
and perform all the specified tasks.
40
Revision A