MacDon FlexDraper FD1 Series Operator's Manual page 394

12. Replace the cover (A) on the float module receptacle.
13. Lift the lever (A) and pull and lower the handle (B) to
disengage the feeder house/float module lock (C).
14. Lower the feeder house (A) until the feeder house
disengages the float module support (B).
15. Back the combine slowly away from the header.
214683
HEADER ATTACHMENT/DETACHMENT
370
Figure 4.137: Float Module Receptacles
C
Figure 4.138: Feeder House Locks
B
Figure 4.139: Header on Combine
A
B
A
A
Revision A