MacDon FlexDraper FD1 Series Operator's Manual page 7

Introduction
This instructional manual contains information on the FD1 Series FlexDraper
Module. It must be used in conjunction with your combine operator's manual.
The FD1 Series FlexDraper
above the ground, using a three-piece flexible frame to closely follow ground contours. The FM100 Combine Float
Module is used to attach an FD1 Series FlexDraper
Carefully read all the material provided before attempting to use the machine.
Use this manual as your first source of information about the machine. If you follow the instructions provided, your
header will work well for many years. If you require more detailed service information, a technical manual is
available from your MacDon Dealer.
MacDon provides warranty for Customers who operate and maintain their equipment as described in this manual.
A copy of the MacDon Industries Limited Warranty Policy, which explains this warranty, should have been provided
to you by your Dealer. Damage resulting from any of the following conditions will void the warranty:
•
Accident
•
Misuse
•
Abuse
•
Improper maintenance or neglect
•
Abnormal or extraordinary use of the machine
•
Failure to use the machine, equipment, component, or part in accordance with the manufacturer's instructions
The following conventions are used in this document:
•
Right and left are determined from the operator's position. The front of the header faces the crop; the back of
the header attaches to the combine.
•
Unless otherwise noted, use the standard torque values provided in Chapter
577.
When setting up the machine or making adjustments, review and follow the recommended machine settings in all
relevant MacDon publications. Failure to do so may compromise machine function and machine life and may result
in a hazardous situation.
The Table of Contents and Index will guide you to specific areas of this manual. Study the Table of Contents to
familiarize yourself with how the information is organized.
214683
®
is specially designed to work well in all straight cut conditions, whether cutting on or
®
®
to most makes and models of combines.
v
and the FM100 Combine Float
8.1 Torque Specifications, page
Revision A