Auger Dent Repair Kit; Upper Cross Auger (Uca) - MacDon FlexDraper FD1 Series Operator's Manual

Combine header

Hide thumbs Also See for FlexDraper FD1 Series:

Table of Contents

6.5.7 Auger Dent Repair Kit

This kit allows Operators to repair dents close to the

finger/guide area that the feed auger may have sustained

during regular use.

Attachment hardware and installation instructions are

included in the kit.

Instruction MD #147606

The upper cross auger (A) attaches in front of the backtube

and improves crop feeding into the center of the header in

heavy crop conditions. It is ideal for high-volume harvesting

of forages, oats, canola, mustard, and other tall, bushy,

hard-to-feed crops.

Order from the following list of kits according to your

header size:

For FD1 North American headers:

• 9.1 m (30 ft.) – MD #B6462

• 10.7 m (35 ft.) – MD #B6463

• 12.2 m (40 ft.) – MD #B6464

• 13.7 m (45 ft.)

57. This is a 12.2 m (40 ft.) auger, and is backtube mounted. It does NOT span the full length of the header.

OPTIONS AND ATTACHMENTS

Figure 6.23: Auger Dent Repair Kit

Figure 6.24: Upper Cross Auger