Shutting Down The Combine - MacDon FlexDraper FD1 Series Operator's Manual

Combine header

Hide thumbs Also See for FlexDraper FD1 Series:

Table of Contents

3.4 Shutting down the Combine

To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key

from ignition before leaving operator's seat for any reason.

To shut down the combine and before leaving the operator's seat for any reason, follow these steps:

1. Park on level ground whenever possible.

2. Lower the header fully.

3. Place all controls in NEUTRAL or PARK.

4. Disengage the header drive.

5. Lower and fully retract the reel.

6. Stop the engine and remove the key from the ignition.

7. Wait for all movement to stop.