Moving Rear (Right) Wheels Into Field Position - MacDon D65 Operator's Manual

5. Align lift hook (A) with lug (B) and lift the wheel
assembly to engage the pin in the lift hook. Ensure
latch (C) is engaged.
6. Install clevis pin (D) and secure to the center of the axle
with hairpin.
7. Lift the wheel assembly to the desired height and slide
the linkage (A) into the appropriate slot in the vertical
support.
8. Push down on the handle (B) to lock.

Moving Rear (Right) Wheels into Field Position

1. Pull pin (A) on the left side rear wheel. Swivel the wheel
clockwise and lock with pin.
147725
OPERATION
Figure 3.78: Front (Left) Wheels
Figure 3.79: Front (Left) Wheels
Figure 3.80: Rear Wheel – Left Side
93
Revision A