MacDon FlexDraper FD1 Series Operator's Manual page 390

19. Pull back the collar on the end of the driveline, and push
the driveline onto the combine output shaft (A) until the
collar locks.
20. Disengage the float locks by pulling each float lock
handle (A) away from the float module and setting it in
the unlocked position (B).
214683
HEADER ATTACHMENT/DETACHMENT
366
Figure 4.127: Driveline and Output Shaft
B
Figure 4.128: Float Lock Handle (Right Side
Shown in Detail, Left Side Opposite)
A
A
Revision A