MacDon FlexDraper FD1 Series Operator's Manual page 378

10. Position the multicoupler (A) on the float module
receptacle and lower the handle (B) to lock the
multicoupler.
11. Push the handle (A) on the combine towards the feeder
house to disengage the feeder house pin (B) from the
float module.
12. Lower the feeder house until the saddle (A) disengages
and clears the float module support (B).
13. Back the combine away slowly from the float module.
214683
HEADER ATTACHMENT/DETACHMENT
354
A
Figure 4.99: Multicoupler Storage
A
Figure 4.100: Feeder House Locks
A
Figure 4.101: Header/Feeder House
B
B
B
Revision A