MacDon FlexDraper FD1 Series Operator's Manual page 109

AGCO combines:
AGCO combines use a combination of the reel fore-aft switches on the control handle and a dealer-installed
auxiliary rocker switch, which toggles between reel fore-aft and header tilt functionality. The location of the rocker
switch varies with combine model.
1. Gleaner A only: Open armrest cover (A) (Gleaner A
only) to expose row of switches, and press
dealer-installed rocker switch (B) to HEADER TILT
position.
NOTE:
Gleaner A shown. Other AGCO combine models have
rocker switch on the console (not shown).
2. Press button (A) on control handle to tilt header forward
(steeper angle) or button (B) to tilt header back
(shallower angle).
214683
OPERATION
A
Figure 3.81: Gleaner A Console
A
Figure 3.82: Gleaner Controls
Figure 3.83: Gleaner Controls
85
B
B
A
B
Revision A