MacDon FlexDraper FD1 Series Operator's Manual page 498

6. Remove two nuts (A).
7. Remove bearing housing (A).
NOTE:
If bearing is seized on shaft, it may be easier to remove
the drive roller assembly. For instructions refer to
Removing Feed Draper Drive Roller, page
Installing Feed Draper Drive Roller Bearing
1. Install the drive roller bearing housing (A) onto the
shaft (B), and secure with two bolts and nuts (C).
214683
MAINTENANCE AND SERVICING
Figure 5.159: Feed Draper Drive Roller Bearing
469.
Figure 5.160: Feed Draper Drive Roller Bearing
Figure 5.161: Feed Draper Drive Roller Bearing
474
A
A
A
B
C
Revision A