MacDon FlexDraper FD1 Series Operator's Manual page 169

3. Adjust cable take-up bracket (B) (if necessary) until
pointer (A) on float indicator is on 0.
4. Ensure header float is unlocked.
5. On the main page of the combine display, select
DIAGNOSTICS (A). The DIAGNOSTICS page opens.
6. Select SETTINGS (A). The SETTINGS page opens.
7. From the GROUP menu, select HEADER (B).
214683
OPERATION
B
Figure 3.196: Float Indicator Box
Figure 3.197: Case IH Combine Display
Figure 3.198: Case IH Combine Display
145
A
A
B
A
Revision A