MacDon FlexDraper FD1 Series Operator's Manual page 309

3. On the HEAD 2 screen, change HEADER SUB TYPE
from DEFAULT to 80/90 as shown at location (A).
There are now two different buttons for ON GROUND
presets. The toggle switch that was present on
previous models is now configured as shown at right.
MacDon headers only require the first two buttons (A)
and (B). The third button down (C) is not configured.
214683
OPERATION
Figure 3.509: New Holland Combine Display
B
Figure 3.510: New Holland Combine Controls
285
A
A
C
Revision A