Moving Rear (Right) Wheels Into Field Position - MacDon D65 Operator's Manual

7. Lift wheel assembly to desired height and slide
linkage (A) into appropriate slot in vertical support.
8. Push down on handle (B) to lock.

Moving Rear (Right) Wheels into Field Position

To move the rear (right) transport wheels into Field position,
follow these steps.
1. Pull pin (A) on the left hand wheel behind the header.
Swivel wheel clockwise and lock with pin (A).
2. Remove pin at (A). Store pin at (B).
3. Pull handle (C) up to release.
4. Lift wheel to desired height and engage support
channel into slot (D) in vertical support.
5. Push down on handle (C) to lock.
169594
OPERATION
Figure 4.79
Figure 4.80
Figure 4.81
A - Pin
C - Handle
95
B - Pin storage location
D - Slot
Rev. C