Storing the Tow-Bar
The tow-bar consists of two sections, an inner half (A) and
an outer half (B), to make storage and handling easier.
1. Place the inner end of the outer half of the tow-bar into
the cradle (A) on the left side of the header backtube.
2. Secure clevis/pintle end of the tow-bar in support (B) on
the endsheet using hitch pin (C). Secure with lynch pin.
3. Install the rubber strap (D) on the cradle (A).
214683
OPERATION
Figure 3.517: Tow-Bar Assembly
Figure 3.518: Tow-Bar Storage – Left Side
293
B
A
B
A
C
D
Revision A