Installing Linkage Covers - MacDon FlexDraper FD1 Series Operator's Manual

2. Rotate cover (A) upward until inboard end can be
lifted off.

Installing Linkage Covers

1. Position inboard end of cover (A) over linkage and
behind indicator bar (B).
2. Lower cover until secure and against header tube.
3. Install screw (A) to hold cover (B) in place.
214683
OPERATION
Figure 3.19: Linkage Cover
Figure 3.20: Linkage Cover
Figure 3.21: Linkage Cover
38
A
A
B
B
A
Revision A