Setting Up Reel Settings (Gleaner S9 Series) - MacDon FlexDraper FD1 Series Operator's Manual

Setting up Reel Settings (Gleaner S9 Series)

CAUTION
Clear the area of other persons, pets etc. Keep children away from machinery. Walk around the machine to
be sure no one is under, on, or close to it.
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the
combine operator's manual for updates.
1. From the COMBINE MAIN MENU, touch REEL
SETTINGS (A) to open the REEL SETTINGS screen.
2. To set minimum reel speed, touch the SPEED
MINIMUM FIELD (B). The on-screen keyboard
displays. Enter the desired value. Touch the green
check mark to accept the new value, or the red X to
cancel. The reel speed is shown in mph and rpm.
NOTE:
At the bottom of the REEL SETTINGS screen, the reel
diameter and reel pulses per revolution (PPR) are
displayed. These values have already been set in the
HEADER SETTINGS screen.
3. Reel speed is calibrated in the REEL SETTINGS
screen by touching the CALIBRATE button (A) in the
top right of the screen.
214683
OPERATION
Figure 3.289: Reel Settings on Combine
Main Menu
Figure 3.290: Reel Settings Calibration
188
A
A
B
Revision A