MacDon FlexDraper FD1 Series Operator's Manual page 256

7. The raise/lower speed, tilt speed, height sensitivity, and
tilt sensitivity can all be adjusted from this page. Select
the option (A) you would like to adjust. This example
shows the raise/lower speed adjustment.
8. Use the + and – buttons (A) to adjust the setting.
9. Press window close button in top right corner of the
window to return to the HEADER page.
10. Select the AUTO CONTROL icons (A). The AUTO
HEADER CONTROLS page opens.
214683
OPERATION
A
Figure 3.391: John Deere S7 Display –
Header Page
Figure 3.392: John Deere S7 Display –
Raise/Lower Speed Adjustment
Figure 3.393: John Deere S7 Display –
Header Page
232
A
A
Revision A