Adjusting Auto Reel Height (Claas 600 And 700 Series) - MacDon FlexDraper FD1 Series Operator's Manual

10. Ensure the progress bar chart displays 100% (A). The
calibration procedure is now complete.

Adjusting Auto Reel Height (CLAAS 600 and 700 Series)

NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the
combine operator's manual for updates.
To adjust the auto reel height, follow these steps:
1. Use the HOTKEY rotary dial (A) to select the REEL
icon (B).
214683
OPERATION
Figure 3.455: CLAAS Combine Display,
Console, and Control Handle
B
Figure 3.456: CLAAS Combine Display and
Console
260
A
A
Revision A