7. Set HEADER SUB TYPE to 80/90 (A) for a New
Holland combine.
8. Select HEAD 2 (A). The HEADER SETUP 2 screen
displays.
9. Select the AUTOFLOAT drop-down arrow and set
AUTOFLOAT to INSTALLED (A).
10. Select the AUTO HEADER LIFT drop-down arrow and
set AUTO HEADER LIFT to INSTALLED (B).
NOTE:
With AUTO HEADER LIFT installed and AHHC
engaged, the header will lift up automatically when you
pull back on the control handle.
11. Set the values for MANUAL HHC RAISE RATE (C) and
MANUAL HHC LOWER RATE (D) for best performance
according to ground conditions.
214683
OPERATION
A
Figure 3.486: New Holland Combine Display
Figure 3.487: New Holland Combine Display
Figure 3.488: New Holland Combine Display
276
A
A
B
C
D
Revision A