MacDon FlexDraper FD1 Series Operator's Manual page 325

6. Remove the pin (A) and install at location (B) to secure
the linkage. Turn the pin to lock.
7. Pull the pin (D), swivel the wheel (C) counterclockwise
90°, and release the pin to lock.
8. Ensure the left wheel is in the transport position
as shown.
9. Pull the pin (A) and swivel the right rear wheel (B)
clockwise 90°.
214683
OPERATION
C
Figure 3.533: Rear Wheels
Figure 3.534: Left Wheel in Transport Position
Figure 3.535: Right Rear Wheel
301
A
B
D
A
B
Revision A