NOTE:
If the indicator is pointing at setting B, it indicates that at
that point the auger fingers will be fully extended. This
allows the crop to be engaged and released later before
entering the feeder house. This setting is best used for
grains or beans.
7. Tighten nuts (A) once adjustment is complete. Torque
nuts to 92–138 Nm (68–10 lbf·ft).
8. Disengage reel safety props. Refer to
Safety Props, page
214683
MAINTENANCE AND SERVICING
Disengaging Reel
32.
Figure 5.83: Auger Setting B
Figure 5.84: Auger Tine Timing Indicator
436
A
B
Revision A