Maintenance Safety - MacDon FlexDraper FD1 Series Operator's Manual

1.4 Maintenance Safety

To ensure your safety while maintaining machine:
•
Review operator's manual and all safety items before
operation and/or maintenance of machine.
•
Place all controls in Neutral, stop the engine, set the park
brake, remove the ignition key, and wait for all moving
parts to stop before servicing, adjusting, and/or repairing.
•
Follow good shop practices:
– Keep service areas clean and dry
– Be sure electrical outlets and tools are properly
grounded
– Keep work area well lit
• Relieve pressure from hydraulic circuits before servicing
and/or disconnecting machine.
• Make sure all components are tight and that steel lines,
hoses, and couplings are in good condition before
applying pressure to hydraulic systems.
• Keep hands, feet, clothing, and hair away from all
moving and/or rotating parts.
• Clear area of bystanders, especially children, when
carrying out any maintenance, repairs, or adjustments.
• Install transport lock or place safety stands under frame
before working under machine.
• If more than one person is servicing machine at same
time, be aware that rotating a driveline or other
mechanically-driven component by hand (for example,
accessing a lubricant fitting) will cause drive components
in other areas (belts, pulleys, and knives) to move. Stay
clear of driven components at all times.
•
Wear protective gear when working on machine.
•
Wear heavy gloves when working on knife components.
214683
SAFETY
Figure 1.8: Safety around Equipment
Figure 1.9: Equipment NOT Safe for Children
Figure 1.10: Safety Equipment
5
Revision A