3. Adjust cable take-up bracket (B) (if necessary) until
pointer (A) on float indicator is on 0.
4. Ensure header float is unlocked.
5. Select DIAG (A) on the Universal display MAIN screen.
The DIAG screen displays.
6. Select SUB SYSTEM (A). The SUB SYSTEM screen
displays.
214683
OPERATION
B
Figure 3.210: Float Indicator Box
Figure 3.211: Case 8010 Combine Display
A
Figure 3.212: Case 8010 Combine Display
151
A
A
1003676
Revision A