MacDon FlexDraper FD1 Series Operator's Manual page 111

2. Press and hold switch (A) on rear of control handle.
3. Press switch (C) to tilt header forward (steeper angle)
or switch (B) to tilt header back (shallower angle).
John Deere combines:
John Deere S700: S700 Series combines use a feeder house deckplate tilting system for header fore-aft
adjustment, instead of using the MacDon center-link for header tilt.
1. Press switch (A) to tilt header forward (steeper angle) or
switch (B) to tilt header back (shallower angle).
214683
OPERATION
Figure 3.86: CLAAS 600/700 Control Handle
A
Figure 3.87: CLAAS 500 Control Handle
Figure 3.88: John Deere 700 Control
87
A
C
C
A
B
B
B
Revision A