John Deere S7 Series Combines; Setting Up Header (John Deere S7 Series) - MacDon FlexDraper FD1 Series Operator's Manual

3.8.12 John Deere S7 Series Combines

Setting up Header (John Deere S7 Series)

NOTE:
Changes may have been made to combine controls or display since this document was published. Refer to
combine operator's manual for updates.
1. Press the header button (A) on the panel below the
display. The HEADER page opens.
2. Select the HEADER TYPE field (A). The HEADER
DETAILS window opens.
214683
OPERATION
Figure 3.386: John Deere S7 Display
Figure 3.387: John Deere S7 Display –
Header Page
230
A
A
Revision A
1022757