MacDon FlexDraper FD1 Series Operator's Manual page 141

5. Remove crop divider from storage location by lifting
crop divider to disengage lugs (A) at lower end and then
lowering it slightly to disengage pin (B) from endsheet.
6. Position crop divider as shown by inserting lugs (A) into
holes in endsheet.
7. Lift forward end of crop divider until pin (B) at top of crop
divider engages and closes latch (C).
8. Push safety lever (D) downwards to lock pin into
latch (C).
214683
OPERATION
Figure 3.138: Stored Crop Divider
C
Figure 3.139: Crop Divider
117
B
A
A
B
D
Revision A