MacDon FlexDraper FD1 Series Operator's Manual page 276

5. Use control knob (A) to highlight the icon that
resembles a header with up and down arrows (not
shown), and press control knob (A) to select it. The
highlighted header icon (B) will be displayed on
the screen.
6. Use control knob (A) to highlight the icon that
resembles a header with up and down arrows (C), and
press control knob (A) to select it.
7. Use control knob (A) to highlight the icon that
resembles a screwdriver (B).
8. Engage the combine separator and feeder house.
9. Press control knob (A) and a progress bar chart will
appear.
214683
OPERATION
Figure 3.437: CLAAS Combine Display,
Console, and Control Handle
Figure 3.438: CLAAS Combine Display,
Console, and Control Handle
Figure 3.439: CLAAS Combine Display,
Console, and Control Handle
252
B
A
B
C
A
B
A
Revision A