MacDon FlexDraper FD1 Series Operator's Manual page 491

5. Remove nuts and screws (A), and remove the draper
connector straps (B).
6. Pull the draper from the deck.
7. Install new draper (A) over the drive roller (B). Make
sure the draper guides fit into the drive roller
grooves (C).
8. Pull draper along bottom of feed deck and over idler
roller (D).
214683
MAINTENANCE AND SERVICING
Figure 5.142: Draper Connector
Figure 5.143: Float Module Feed Draper
467
A
B
C
D
A
B
C
Revision A