Case Ih 5130/6130/7130 And 5140/6140/7140 Mid-Range Combines; Setting Up The Header On The Combine Display - MacDon FlexDraper FD1 Series Operator's Manual

3.8.4 Case IH 5130/6130/7130 and 5140/6140/7140 Mid-Range Combines

Setting up the Header on the Combine Display (Case IH 5130/6130/7130; 5140/6140/7140)
1. On the main page of the combine display, select
TOOLBOX (A).
2. Select the HEAD 1 tab (A). The HEADER SETUP page
displays.
NOTE:
To locate the HEAD 1 tab, you may need to scroll to the
right using side arrows (C).
3. From the CUTTING TYPE menu (B), select
PLATFORM.
4. Select the HEAD 2 tab (A). The HEADER SETUP 2
page displays.
5. From the HEADER PRESSURE FLOAT menu (B),
select NOT INSTALLED.
6. If you are operating a D1 Draper Header, from the
DRAPER GRAIN HEADER STYLE menu (C), select
RIGID 2000 SERIES.
If you are operating an FD1 FlexDraper
the DRAPER GRAIN HEADER STYLE menu (C),
select FLEX 2000 SERIES.
214683
OPERATION
Figure 3.188: Case IH Combine Display
Figure 3.189: Case IH Combine Display
®
Header, from
Figure 3.190: Case IH Combine Display
142
A
B
A
C
B
C
C
A
Revision A