Removing Crop Divider Rods; Installing Crop Divider Rods - MacDon FlexDraper FD1 Series Operator's Manual

Removing Crop Divider Rods

1. Loosen bolt (A) and remove crop divider rod (B) from
both sides of header.
2. Store both crop divider rods (A) inboard on the right
side endsheet.

Installing Crop Divider Rods

1. Remove crop divider rods (A) from storage location on
inboard of right side endsheet.
214683
OPERATION
B
Figure 3.144: Crop Divider Rod
Figure 3.145: Right Side Endsheet
Figure 3.146: Right Side Endsheet
120
A
A
A
Revision A