MacDon FlexDraper FD1 Series Operator's Manual page 525

Combine header

Hide thumbs Also See for FlexDraper FD1 Series:

Table of Contents

7. Tension the draper. Locate adjuster bolt (A) and follow

the directions on the decal (B) or refer to

Adjusting Draper Tension, page 488

draper tensioning.

8. Disengage the reel and header safety props.

9. Start the engine and lower the header and reel.

10. Run the machine to verify the draper tracks correctly. If

further adjustment is necessary, refer to

Adjusting Header Draper Tracking, page

MAINTENANCE AND SERVICING

for the proper

Figure 5.217: Draper Tensioner (Left Side

Shown, Right Opposite)

Troubleshooting