MacDon FlexDraper FD1 Series Operator's Manual page 99

8. Unlock the wings by moving spring handles (A) to lower
(UNLOCK) position.
NOTE:
If lock link does not engage lower slot, move wing with
the torque wrench until lock link moves into slot.
9. Retrieve wrench (A) from float module right leg.
10. Place torque wrench (A) onto bolt (B).
214683
OPERATION
A
Figure 3.58: Wing Lock in UNLOCK Position
Figure 3.59: Torque Wrench
Figure 3.60: Balance Linkage
75
A
B
Revision A
A