MacDon FlexDraper FD1 Series Operator's Manual page 176

7. Select HDR HEIGHT/TILT (A). The SENSOR screen
displays.
8. Select LEFT SEN (A). The exact voltage is displayed.
Raise and lower the header to see the full range of
voltage readings.
9. If the sensor voltage is not within the low and high
limits, or if the range between the low and high limits is
insufficient, adjust the voltage limits. Refer to
Voltage Limits: One-Sensor System, page
214683
OPERATION
Figure 3.213: Case 8010 Combine Display
Figure 3.214: Case 8010 Combine Display
Adjusting
131.
Figure 3.215: Case 8010 Combine Display
152
A
A
1003678
Revision A