16. Align the lugs on the connector (A) with the slots in the
receptacle (B), push the connector onto the receptacle,
and turn the collar on the connector to lock it in place.
17. Detach safety chain (C) from support bracket (B).
18. Pull collar (D) back to release driveline (A) from support
bracket. Remove the driveline from support bracket.
19. Pull back the collar (A) on the end of the driveline, and
push the driveline onto the combine output shaft (B)
until the collar locks.
214683
HEADER ATTACHMENT/DETACHMENT
335
A
B
Figure 4.56: Electrical Connection
A
C
Figure 4.57: Driveline in Storage Position
A
Figure 4.58: Combine Output Shaft
D
B
1024063
B
Revision A