MacDon FlexDraper FD1 Series Operator's Manual page 542

7. Line up the tine tube (B) with the cam arm and install
bolt (A). Torque bolt to 165 Nm (120 lbf·ft).
8. Install the bolts (A) securing tine tube arm (B) to the
center disc.
9. Install tine tube arm (B) and endshield support (C) to
the tail end of the reel at the applicable tine tube
location and secure with bolts (A).
NOTE:
There are no endshields on the center discs.
10. Install the endshield support (A) at the applicable tine
tube location at the cam end.
11. Reinstall the reel endshields. Refer to
Endshields, page 523.
214683
MAINTENANCE AND SERVICING
Figure 5.254: Cam End
Figure 5.255: Tail End
Replacing Reel
Figure 5.256: Cam End
518
A
B
A
A
B
C
Revision A