MacDon FlexDraper FD1 Series Operator's Manual page 211

7. Touch the REEL DIAMETER field (A) and a numeric
keypad displays. Enter 40 for a MacDon reel.
8. Touch the REEL PPR (Pulses Per Revolution) field (B)
and enter 30 as the value for your MacDon header.
(PPR is determined by the number of teeth on the reel
speed sprocket).
9. Touch the green check mark (B) at the bottom of the
numeric keypad (A) when complete, or the red X to
cancel.
10. When complete, touch the green check mark (A) at the
bottom of the HEADER SETTINGS screen.
214683
OPERATION
Figure 3.286: Header Settings
A
B
Figure 3.287: Numeric Keypad
A
Figure 3.288: Header Settings Page
187
A
B
Revision A