MacDon FlexDraper FD1 Series Operator's Manual page 40

•
Disengage header drive, put transmission in Neutral, and wait for all movement to stop before leaving
operator's position.
•
Stop the engine and remove the key from the ignition before servicing, adjusting, lubricating, cleaning, or
unplugging machine.
•
Engage safety props to prevent lowering of raised unit before servicing in the raised position.
•
Use slow moving vehicle emblem and flashing warning lights when operating on roadways unless prohibited
by law.
MD #184422
Chain drive hand and arm entanglement hazard
WARNING
•
Do NOT open or remove safety shields while engine is
running.
•
To avoid injury, stop the engine and remove the key
before opening shield.
MD #220797
Tipping hazard in transport mode
WARNING
•
Read the operator's manual for more information on
potential tipping or rollover of header while transporting.
214683
SAFETY
Figure 1.30: MD #184422
Figure 1.31: MD #220797
16
Revision A