6. Use the < or > key to select the REEL WINDOW.
Window E15 will display the current advance or retard
speed of the reel in relation to the ground speed.
7. Press the OK key (E), and use the < key (C) or the
> key (D) to select the REEL FORE AND AFT window.
8. Use the – key (A) or the + key (B) to set the reel fore-aft
position.
NOTE:
Control handle button (A) or button (B) also can be used
to set the reel fore-aft position.
214683
OPERATION
Figure 3.432: CLAAS Combine Display
Figure 3.433: CLAAS Combine Display
C
A
Figure 3.434: CLAAS Combine Controls
250
E
D
B
Revision A