6. Position crop divider as shown by inserting lugs (A) into
holes in endsheet.
7. Lift forward end of crop divider and install bolt (A) and
special stepped washer (B) (step towards divider).
Tighten bolt.
8. Pull the tip of the crop divider to ensure there is no
lateral movement. If necessary, adjust bolts (C) to
tighten crop divider and eliminate lateral movement.
9. Close or install endshields. Refer to
page
33.
3.7.14 Crop Divider Rods
Crop divider rods are used in conjunction with crop dividers. The removable crop divider rods are most useful when
crop is bushy or down. In standing crops, using only crop dividers is recommended.
Table 3.19 Crop Divider Rods Recommended Use
Alfalfa
Canola
Flax
Grass seed
Lentils
214683
OPERATION
3.2.3 Endshields,
With Divider Rods
Lodged cereal
Sudan grass
Winter forage
Figure 3.142: Crop Divider
Figure 3.143: Crop Divider
Peas
Soybeans
119
A
B
A
C
Without Divider Rods
Edible beans
Milo
Rice
Soybeans
Standing cereal
Revision A