MacDon FlexDraper FD1 Series Operator's Manual page 444

5. Before adjusting the auger to pan clearance, check the
auger float position to determine how much clearance is
required:
•
If the bolt head (A) is closest to the floating
symbol (B), the auger is in the floating position.
CAUTION
Make sure the two bolts (A) are in the same location to
prevent damage to the machine during operation.
•
If the bolt head (A) is closest to the fixed symbol (B), the
auger is in the fixed position.
214683
MAINTENANCE AND SERVICING
Figure 5.49: Floating Position
Figure 5.50: Fixed Position
420
A
A
B
A
A
B
Revision A