Removing Plastic Fingers - MacDon FlexDraper FD1 Series Operator's Manual

Combine header

Hide thumbs Also See for FlexDraper FD1 Series:

Table of Contents

Removing Plastic Fingers

To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key

before making adjustments to machine.

To avoid bodily injury from fall of raised reel, always engage reel safety props before going under raised

reel for any reason.

1. Shut down the engine and remove key from the ignition.

2. Remove screw (A) using a Torx

3. Push the clip at the top of the finger back towards the

reel tube as shown and remove the finger from the tube.

MAINTENANCE AND SERVICING

Plus 27 IP socket

Figure 5.232: Removing Plastic Finger

Figure 5.233: Removing Plastic Finger