Debug Port
Bits
Function
[31:28]
Version
12-52
The Identification Code Register, IDCODE
The Identification Code Register is always present on all DP implementations. It
provides identification information about the ARM Debug Interface.
JTAG-DP
It is accessed using its own scan chain.
SW-DP
It is at address 0b00 on read operations when the DPnAP bit =1. Access
to the Identification Code Register is not affected by the value of the
CTRLSEL bit in the Select Register.
It is:
•
a read-only register
•
always accessible.
Figure 12-21 shows the register bit assignments.
Table 12-16 lists the bit functions of the Identification Code Register.
Description
Version code. The meaning of this field is Implementation-defined.
Copyright © 2005, 2006 ARM Limited. All rights reserved.
Figure 12-21 Identification Code Register bit assignments
Table 12-16 Identification Code Register bit assignments
ARM DDI 0337B