Core Debug Access Example - ARM Cortex-M3 Technical Reference Manual

Core Debug
10.3

Core debug access example

10-12
If you want to halt the processor and write a value into one of the registers, perform the
following sequence:
1. Write
0xA05F0003
debug and halts the core.
2. Wait for the S_HALT bit of the Debug Halting and Status Register to be set. This
indicates that the core is halted.
3. Write the value that you want to be written to the Debug Core Register Data
Register.
4. Write the register number that you want to write to into the Debug Core Register
Selector Register.
Copyright © 2005, 2006 ARM Limited. All rights reserved.
to the Debug Halting Control and Status register. This enables
ARM DDI 0337B