Show Ip Management-Route - Dell Z9500 Reference Manual

Dell#
Usage The following describes the show ip interface brief command shown in the
Information
following example.
Fields
Interface
IP-Address
Ok?
Method
Status
Protocol
Example (Brief)
Dell#show ip interface brief
Interface
Status
TenGigabitEthernet 1/0
administratively down down
TenGigabitEthernet 1/1
administratively down down
TenGigabitEthernet 1/2
up
TenGigabitEthernet 1/3
up
TenGigabitEthernet 1/4
up
TenGigabitEthernet 1/5
up
TenGigabitEthernet 1/6
administratively down down

show ip management-route

View the IP addresses assigned to the Management interface.
Z9500
Syntax
show ip management-route [all | connected | summary | static]
Parameters
all
connected
IPv4 Routing
Description
Displays type of interface and the associated slot and port
number.
Displays the IP address for the interface, if configured.
Indicates if the hardware is functioning properly.
Displays "Manual" if the configuration is read from the saved
configuration.
States whether the interface is enabled (up) or disabled
(administratively down).
States whether IP is enabled (up) or disabled (down) on the
interface.
IP-Address
Protocol
unassigned
unassigned
unassigned
up
unassigned
up
unassigned
up
10.10.10.1
up
unassigned
(OPTIONAL) Enter the keyword all to view all IP addresses
assigned to all Management interfaces on the switch.
(OPTIONAL) Enter the keyword connected to view only
routes directly connected to the Management interface.
OK? Method
NO Manual
NO Manual
YES Manual
YES Manual
YES Manual
YES Manual
NO Manual
943